Adaptive everything

1. Rectangle Profile Generic Model & Its Family Type 2. Curtain Pattern Based.rft > Forming Rotating Blade Shape  *Width : Reporting Parameter 3. Mockup-Panel_Rectangle Family Type * Pattern : U,V Grid Number Fixed 4. RotatingBlade_SunScript * Formula : If Azumith < 0, 90, 0 : According to the location of the Sun, the Azumith Value has positive or negative value  5. RotatingBlade_SunScript_Twisted * When Rotation_Top,Bot = 0, The Panel will twist Order of RotatingBlade_SunScript 1. Make Family 'CurtainPanel_RotatingBlade.rfa' 2. Start with 'Mockup-Panel_Rectangle.rfa' (Upload Panel family) 3. Open Dynamo API 'RotatingBlade_SunScript.dyn' ====================================================== 4. According to the Sun Location, Panel will be changed the feature by the Rotating Angle

1. Pattern Image 2. Pattern Dynamo

0. What to make? 1. Profile of Structural Framing (Make 'New Conceptual Mass' - Mass.rfa ) - Make 4 Type of Profile  Aligning point on reference plane & Locking 2. Structural Framing ( Generic Model Adaptive.rfa ) - Gather each of 2 type Large & Small , Create Form 3. Make Connector ( Generic Model.rfa ) - Extrusion with profiling, Setting the Parameter 4. Assembly & Make Curtain Panel ( Curtain Pattern Based.rfa ) - One Panel : Possitive value(1'), Another Panel : Negative value(1') Offset 1: furrings (Large frame & connector), Upper support (Small frame & connector) Offset 2 : Panel location of Normal vector (Normalized Curve Parameter > Segment Length )

OculusTriangle - Using [3pt-Bezier-Curve] <Order> 1. Open Family 'Curtain Panel Pattern Based' 2. Change the pattern 'Rectangle' > 'Triangle(flat)' 3. Draw the lines from the each of the points to mid points onto opposite side line 4. Change into reference line 5. Setting Normalized Curve Parameter on the reference line 6. Upload the [3pt-Bezier-Curve] on the project, and draw the spline along the Points that already be applied on normalized curve parameter 7. Repeat 3 times 8. Setting the values and formulas, as showen on the 'Family Type' *Caution 1. The choosing order of the Normalized Curve Parameter Points should be followed by the family '3pt-Bezier-Curve' 2. When selecting the curve, be careful with only choosing the model line 3. Turn off the visible check of [3pt-Bezier-Curve] > When turning on, on the project model will show the model line of the family

1. Rectangle Panel & Its Parameter Setting 2. Sliding Panel [3D-View, Floor, South-View ] 3. Sliding Panel Family Type 4. Slope Calcultion * What is picture saying? Picture 1 is showing you the Panel that will be sliding on the grid Picture 2 is the Sliding Panel that is already adapted on the rectangle Pattern grid Picture 3 is the Family type of the Sliding Panel. and there are lots of parameter of the table. Picture 4 is the method how we can measure the slope angle to allocate the Rotation_Angle,(2) In Picture 3 With changing the offset value, It can appear the Z axis dimension between two panel in one grid. also, changing H2 & W2 value can present the proportion of the occupacy on one grid. and Point Position will tell you the location where is the center of the rectangle grid.

Umbrella_Curtain-Panel : Using [Adaptive-Panel_Rotating-Correct-Version].rfa 1. Open 'Curtain Panel Pattern Based' 2. Create Form with 'Reference Line' on the center of the grid 3. Make flat form that do not have any extrusion offset 4. Divide surface with U-Grid : 2, V-Grid : 2 5. Surface Representation > Display Properties > Check 'Nodes' 6. Apply 'Adaptive-Panel_Rotation-Correct-Version.rfa' at each surface end points In Property dialog Box, the variables are setting with instance parameter, you can change the value with editting the Rotation angle of 'Adaptive-Panel_Rotation-Correct-Version.rfa' Family